DOM tube

Motorsports banter, suggestions, ideas, and general armchair racing.

Moderators: flogger, SilverYota, JimR, Thorox

Post Reply
Kent
Posts: 72
Joined: Wed Sep 17, 2014 9:24 am
Location: Washburn MO

DOM tube

Post by Kent » Mon Mar 07, 2016 1:03 pm

I'm looking for a local vendor that may have good pricing on DOM tubing.

I'll be looking for 1 1/4" x .095 and/or 1 3/8" x .095.

Any of you know where I should look at. Called local metal supply and they do not stock and/or not able to order DOM tube.

Thank you,

Kent

bholliday
Posts: 3
Joined: Thu Jun 04, 2015 11:31 am

Re: DOM tube

Post by bholliday » Mon Mar 07, 2016 5:45 pm

Kent,

I don't know of any suppliers local to you, but you might try the following,if you can't find a better source:

Ryerson (Tulsa or Fort Smith)

Online Metals

Mcmaster Carr (Doesn't look like they have the 0.095 wall thickness in 1020/1026)

Regards,
Brad
Brad Holliday

springfielddyno
Posts: 347
Joined: Mon Sep 11, 2006 11:52 am
Contact:

Re: DOM tube

Post by springfielddyno » Sat Mar 12, 2016 8:14 am

Locally.

Rose metal
Ozark mtn steel.

I've used both recently. I always call around cause price always moves around. Most time they have to order.

I have 1.5-.095 and 1.5-.065 if you only need some.

Sam

Kent
Posts: 72
Joined: Wed Sep 17, 2014 9:24 am
Location: Washburn MO

Re: DOM tube

Post by Kent » Wed Mar 16, 2016 7:45 pm

Thank you for the suggestions Brad and Sam.

I ended up going with an online source, and getting the hoops bent from the same. I believe I'll save some money in the end.

http://www.rollcagecomponents.com/

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests